Residential · Charlotte, NC
Traditional stucco is still one of the toughest exterior claddings when it is mixed, layered, and cured the right way. Superior Stucco Charlotte (serving since 2019) installs and repairs traditional stucco for homes and commercial buildings across Charlotte with a focus on water management and clean, consistent finishes.
A durable traditional stucco job starts at the substrate. We inspect framing and sheathing, then install a proper water-resistive barrier (Grade D building paper or equivalent) with correctly lapped seams, kickout flashing at roof-to-wall intersections, and weep screed at the base so moisture has a way out. Next comes galvanized, self-furred metal lath, fastened on stud lines with corrosion-resistant fasteners and proper overlap, followed by a scratch coat and brown coat built to typical three-coat thickness (about 7/8 inch total). We mix and apply cement-lime plaster to the right consistency, keep planes straight with screeds, and allow proper moist curing before moving to finish.
In the Charlotte region, heat, humidity, and wind-driven rain can punish weak details, so we pay attention to drainage, control joints, and sealant transitions at windows, doors, hose bibs, and penetrations. Traditional stucco can be finished smooth, sand float, lace, dash, or a light skip trowel, and we can blend new work into existing textures during repairs. Color can be integral (tinted finish coat) or painted with a breathable masonry coating after cure time, depending on the look and maintenance goals. When damage is present, we trace cracks to their cause (movement, impact, moisture), repair the base properly, and feather the finish for a natural match instead of a patched look.
Charlotte customers choose us because we treat traditional stucco as a system, not just a surface. You get clear scope and line-item pricing, plus practical recommendations on flashing, sealants, and water-shedding details that prevent recurring leaks. Our crews use jobsite mixers, hawk and trowel work, straightedges, and moisture checks where needed, and we keep the site clean and controlled to protect landscaping and adjacent finishes. We are licensed and insured, and we stick to proven installation practices that align with industry guidance for three-coat stucco over lath.
Before we wrap up, we walk the project with you and verify edges, corners, and terminations, including weep screed clearance, control joint placement, and sealant joints that must remain flexible. Repairs and new installations include careful masking, protection of windows and doors, and cleanup of splatter from masonry, concrete, and trim. You receive a free written estimate up front, plus a clear plan for cure times, painting timelines (if applicable), and maintenance basics like keeping mulch and soil below the screed line. The goal is simple, traditional stucco that looks right, sheds water, and stays stable year after year.
Yes. We provide a free written estimate with a clear scope, recommended materials, and expected schedule.
Yes. We work on EIFS repairs and cement-based hard-coat stucco, and we match repair methods to the specific system on the building.
Timelines depend on access, removal depth, and cure requirements, but most small repairs take 1-2 days, while larger replacements run longer due to prep, multiple coats, and drying time.
Yes. We evaluate common failure points like window and door transitions, roof-to-wall intersections, sealant joints, and termination details to address root causes.
Yes. Superior Stucco Charlotte is licensed and insured for stucco work.
Traditional stucco is a cement-based, three-coat exterior plaster system built over a water-resistive barrier and metal lath. When installed correctly, it delivers a hard, impact-resistant shell with classic texture options and long service life. Superior Stucco Charlotte installs new traditional stucco and handles repairs, matching existing finishes while correcting the details that often cause cracking and moisture intrusion.
Traditional stucco performs best when the wall is built to manage water, not trap it. We start with substrate evaluation, then install the water-resistive barrier with correct overlaps and flashing integration. Next we install lath, corners, and accessories like control joints, casing beads, and weep screed. The scratch coat is keyed into the lath, then the brown coat is rodded and floated flat to create a stable base for the finish. We follow practical cure windows so the cement-lime plaster gains strength instead of drying too fast.
For repairs, we do more than fill cracks. We identify whether the issue is localized impact damage, shrinkage cracking, missing control joints, or water entry around windows, doors, decks, or rooflines. Damaged areas are cut back to sound material, re-lathed as needed, and rebuilt with compatible base coats before a finish coat is applied and blended. If paint is planned, we discuss breathable coatings and timing so moisture can escape during cure.
If you want a traditional stucco look for new construction, an addition, or you need patching that does not stand out, we can help. Expect straightforward communication, a written scope, and workmanship that prioritizes straight planes, clean edges, and durable water-shedding details. Request a free written estimate and we will review your wall conditions, finish options, and a realistic schedule.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Charlotte. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
